Disc Diffusers | Tube Diffusers | Blowers/Packages | Support Stands | Pipes | Accessories | Membranes
Aeration Products menu
Thank you for your interest in Aeration Store products. Please fill out as much of the following information as possible so that we can make our most accurate recommendation to you. If you have any questions about this form, please contact us at 845-454-8171.
Tom Frankel & Todd Ritter
  Project Name:
Project Location:
PERSONS TO CONTACT
Company Name:
Street Address:
City:
State/Province etc.:
Zip/Postal Code:
Country:
FACILITY OWNER/OPERATOR/MANAGER/CONSULTING ENGINEER
Contact Name:
Position:
Email:
Phone No.:
Fax No.:
Type Project: New Plant Upgrade Existing Plant
Type of Waste: Municipal Industrial (*specify below)
TREATMENT PROCESS APPLICATION (Please check all that apply)

Aerated Lagoon
Activated Sludge
Replace Equipment Existing
Plant
SBR
Equalization Basin
Sludge Holding Tank/Aerobic
Digester
Oxidation Ditch
Other (Specify):
TREATMENT OBJECTIVES

BOD Reduction
Improve Winter Operation
Biological Nutrient Reduction (P)
Nitrification
Odor Control
Mixing Application
Industrial Pretreatment
Increase Dissolved Oxygen
Biological Nutrient Reduction
      (N)
Algae Control
Energy Reduction
Other (Specify):          
PROJECT STATUS

Preliminary or Budgetary Purpose
Currently Under Engineering
      Design
DESIGN TEMPERATURE RANGES
Influent Wastewater Temp.:      Summer Winter
ELEVATION
Plant Site Elevation Above Sea Level        FT/M
ALPHA AND BETA FACTORS
Factors: Alpha        Beta        
(If none are given, typical values will be assumed)

WASTE INFLUENT FLOW
Design Ave.:   M3/day or    mgd
Present Ave.:   M3/day or    mgd
Peak Flow and/or Peaking Factor:   M3/day or    mgd
 Advise if seasonal variations  

WASTE CHARACTERISTICS AT DESIGN FLOW
Influent
Normal
 (Designed)
Desired Effluent
 Permit
Requirements
BOD mg/l
COD mg/l
TSS mg/l
TKN
NH3-N mg/l
Total Nitrogen
Total Phosphorus
BOD @ Peak Flow
PRETREATMENT FACILITIES
Pre Clarifier-No. & Size or Area:
Screening-Type & Size:
Other (Specify):
  Equalization Basin Grit Removal None
AERATED BASIN TYPE & SIZE(S)
Basin Number:
*Type of Basin:
Length x Width x Depth (At Top of Water Level):
Slope:
Volume:
Water Depth:
  *Please describe materials of construction for each basin, ie. concrete, earthen lined, clay lined, fabric lineer, etc.
AERATION EQUIPMENT REQUIREMENTS
1. Basin(s) where aeration is to be considered.
2. Type of existing aeration equipment (Hp/KW) and type of mechanical or diffuser system. For diffused air list type, size, and capacity of blowers. For surface aerators list horsepower.
3. Existing blower type, HP.

  Brand Name: 
  Number:        
  HP/KW:        
4. Is new equipment to supplement or replace existing equipment?
5. Estimated cost of electrical power $    /kw
ELECTRICAL SERVICE AVAILABLE
  Volts    Phase    Hertz   Electrical Cost $    /kw
OPERATIONAL CONSIDERATIONS THAT WILL AFFECT THE DESIGN OF THE SYSTEM
Fluctuating water levels (Specify):
Seasonal Operation:
Intermittent Loading:
Shift Operation:   hrs/day    days/wk
SKETCH OR SCHEMATIC FLOW DIAGRAM OF SYSTEM
Please fax sketch or send a schematic of the entire treatment system indicating flow path thru system e.g. parallel vs. series. Also indicate final disposal method i.e., load application, reuse, surface water drainage. Send to:

Aeration Store
4 Tucker Drive, Poughkeepsie, NY 12603, USA
tel: 845.454.8171fax: 845.454.8094
PREPARED AND PROVIDED BY
Name:
Title:
Email:
Phone:
Fax:
 

Back to top

Aeration Store Home | About Us | Contact Us | How To Select Diffusers | How To Assemble Blower Packages
Technical Downloads| Blower Specs. | Customer Service | Order Options/Security | Privacy Policy | Site Map